Tanning Lamps

There are a number of tanning bed lamps in each sun bed on the market. When you are getting a new or especially a used or older tanning bed make a careful examination of the bulbs. Ensure that they are proper tanning bulbs & comply with the FDA regulations with regard to health & safety. You should also consider how easy it to get at the lamps. Be sure that the bulbs are not difficult to change when needed. It is very important & a lot cheaper if you can perform such routine maintenance yourself if you buy a home tanning bed.

There are two very different non-interchangeable sorts of lamps used in conventional & high pressure beds. You need to make sure you get the right sun bed bulbs for your sun bed because you cannot use just any bulb you like. If you are buying replacement bulbs on the Internet check the make & model of your existing lamps very carefully because you have to make sure that the lamps you are buying are suitable for your bed.

High Pressure Tanning Bulbs: high pressure beds have quartz-tube lamps in a multitude of sizes. The gases used in these lamps are pressurized to slightly higher than atmospheric pressure. The bulbs in these beds are located in the canopy of the bed so that you tan only from above. When you have tanned the skin on one side of your body for about 10-12 minutes you turn over & tan the other side. The flat bed of these tanners is great deal more comfortable than a regular sun bed.

The biggest advantage of these lamps is the short time you need to spend on the bed. Since you tan more quickly you need to spend less time in the salon which means it works out cheaper. You can achieve the level of tan you require in about three weeks of three to five sessions each week. With a conventional bed it would take you at least a month to acquire the same level of colour. Maintaining your tan is much easier too. You only need two or three sessions a month to maintain the colour compared with that many sessions every week on a low pressure bed. Many of these bulbs produce UVA rays only not UVB rays which are responsible for burning.

Conventional Tanning Bed Bulbs: Conventional or low pressure sunbeds use long tube lamps that look like regular fluorescent tubes. The lamps are situated above & below the tanning bed which means that all the body parts are tanned at the same time without having to roll over during the tanning session.

Conventional beds use UVA & UVB rays in varying mixes. Some use both rays & others emit mostly UVA with some UVB rays. UVA rays are the cause of the premature ageing effects on the skin & UVB rays are the burning rays that produce sun burn when you are outside in the sun. It is very important to discover which kind of rays your sun bed’s bulbs emit. You must ensure you replace your existing bulbs with bulbs of the same specifications after about 1,000 hours of use.

Another consideration when selecting the type of bed you use at home or in the salon is the tanning bed lotion you will use. Different lotions suit different sorts of beds. The owner of your tanning salon will be able to help you choose a lotion that will be best for the bed you are using & your skin type. Regardless of the bed you use you should certainly always use a lotion or a cream because they will moisturise your skin & help you tan faster.

Do you want to discover more about tanning bed bulbs? If you do just visit our website on tanning bed bulbs Grab a totally unique version of this article from Uber Article Directory